Other

Sort by:
Page 1 of 1312345...10...Last »
  • Using Contact Adhesive 6:15

    Using Contact Adhesive

    Contact adhesive is the preferred adhesive for adhering plastic laminate to a substrate. But the way contact adhesive is used is different from most other adhesives. If you don’t... Read more

  • How to Finish the Ends of a Melamine Cabinet 4:17

    Finished Ends on Melamine Cabinets

    There are a lot of benefits to using melamine for cabinet cases. One downside with building melamine cabinets is that you end up with an unfinished melamine face on... Read more

  • Using Woodworking Software for Project Layout 6:04

    Using Woodworking Software for Project Layout

    When you use sheet goods in your shop how do make sure you’re getting the most you can out of each sheet? It’s relatively easy on small projects, but... Read more

  • Cutting Non-Ferrous Metals on a Miter Saw 3:06

    Cutting Non-Ferrous Metals on a Miter Saw

    Cutting wood on your miter saw is pretty routine, but did you know that you can also use your miter saw to cut non-ferrous metals like aluminum and brass? ... Read more

  • Drilling Straight Holes with a Hand Held Drill 7:01

    Drill Straight Holes with a Hand Held Drill

    The best way to drill perfectly straight holes is on a drill press, but some projects are so large you can’t take them to a drill press. Or, you... Read more

  • How to Face Off and Turn End Grain - Woodworking Video 3:56

    How to Face Off and Turn End Grain – Woodworking Video

    George Vondriska teaches you how to complete a sheering cut with a bowl gouge in order to face off the rough end grain on a spindle. He demonstrates the... Read more

  • How to Dish Out a Stool Seat - Woodworking Video 9:49

    How to Dish Out a Stool Seat – Woodworking Video

    George Vondriska teaches you how to use a bowl and tray bit on a handheld router to dish out an oak stool seat so that it is more comfortable... Read more

  • Making a Tapered Leg Jig Using a Table Saw 8:47

    Making a Tapered Leg Jig Using a Table Saw

    George Vondriska teaches you how to create a simple custom-dimension tapered leg jig for your woodworking projects that require tapered chair or table legs. He walks you through the... Read more

  • Creating a Wooden Hinge for a Gate Leg Table 7:52

    Creating a Wooden Hinge for a Gate Leg Table

    George Vondriska teaches you how to create a wooden hinge for your woodworking projects by using a ¾-inch dado head on the table saw. He walks you through the... Read more

  • Boring the Hinge Pin into the Wooden Hinge for a Gate Leg Table 3:47

    Boring the Hinge Pin into the Wooden Hinge for a Gate Leg Table

    George Vondriska teaches you how to properly drill a hole for the hinge pin that allows a wooden hinge to pivot. He shows you how to use a white... Read more

Page 1 of 1312345...10...Last »