Lathe Videos

Sort by:
Page 1 of 212
  • How to Face Off and Turn End Grain - Woodworking Video 3:56

    How to Face Off and Turn End Grain – Woodworking Video

    George Vondriska teaches you how to complete a sheering cut with a bowl gouge in order to face off the rough end grain on a spindle. He demonstrates the... Read more

  • Hand Cut Dado Using a Router Plane 6:16

    Using Hand Tools to Cut a Dado – Part 4

    In the final installment of our four-part series on cutting dadoes with hand tools, George Vondriska teaches you how to properly use a router plane to finish up the... Read more

  • Using a Bowl Gouge: Bowl Interior 6:34

    Using a Bowl Gouge: Bowl Interior

    George Vondriska puts a piece of wet walnut onto the lathe to demonstrate the benefits of using a bowl gouge to hollow out the interior of a bowl instead... Read more

  • How to Get a Smooth Finish Using Kraft Paper 2:09

    Wood Finishing Tips: Using Kraft Paper for a Smooth Finish

    George Vondriska demonstrates one of his expert wood finishing tips that you might not have considered. He teaches you how to use a piece of kraft paper or the... Read more

  • Sanding and Polishing Soapstone on the Lathe 4:38

    Sanding and Polishing Soapstone on the Lathe

    Amaze all your woodworking buddies by showing off a perfectly polished soapstone project! George Vondriska teaches you how to properly sand a piece of soapstone and polishing soapstone with... Read more

  • Turning Crotchwood Wood turning projects 9:10

    Turning a Bowl Made from Crotch Wood

    Watch as George Vondriska turns a hefty chunk of maple crotchwood into a beautifully finished bowl. He walks you step-by-step through the woodworking process for turning a bowl made... Read more

  • Soapstone on the Lathe 4:35

    Cutting Soapstone on the Lathe

    Woodworking expert George Vondriska teaches you how to properly prepare, mount and cut soapstone blanks on the lathe in your workshop. When cutting soapstone, because it is a soft... Read more

  • Mounting a Spindle in a Four Jaw Chuck 1:46

    Mounting a Spindle in a Four Jaw Chuck

    When turning a spindle on a lathe, it can be difficult for most woodworkers to mount the spindle blank parallel to the axis of the lathe, so George Vondriska... Read more

  • Add a Curved Accent Stripe 5:03

    Add a Curved Accent Stripe to Your Woodworking Project

    George Vondriska teaches you how to add a touch of class to the handle of an ice cream paddle or any other lathe-turned kitchen utensil with a curved accent... Read more

  • Handy Lathe Table 51.:07

    Handy Lathe Table Plans

    George Vondriska provides handy lathe table plans for your workshop, making sure the lathe is at the proper height for your woodworking needs. From just two sheets of MDF,... Read more

Page 1 of 212