Lathe

Sort by:
Page 1 of 3123
  • Turn a Bottle Opener - Part 2 Turn & Finish 17:09

    Make a Bottle Opener Handle on the Lathe – Part 2 Turn and Finish

    After you’ve created your bottle opener blank with the inlay accent stripe, all that’s left is to install the hardware and turn, sand and finish the handle. The process... Read more

  • Turn a Bottle Opener - Part 1 Glue Up the Blank 5:49

    Make a Bottle Opener Handle on the Lathe – Part 1 Glue Up the Blank

    Add some flare to your utensil drawer with this stylish wooden bottle opener, which you can turn from a few pieces of walnut and a veneer inlay. All you’ll... Read more

  • Repair a Punky Turning 3:00

    Using CA Glue to Repair a Punky Turning

    George Vondriska teaches you how to use CA glue to salvage any turning project that has a rotted or punky patch. He demonstrates this simple woodworking tip on a... Read more

  • Adding Antler Accents 9:57

    Adding Antler Accents

    Adding antler accents to a project – in this case, a lidded box – can be a nice feature. Watch as George Vondriska turns a piece of antler on... Read more

  • Using Carbide Lathe Chisels on Solid Surface Materials 2:01

    Using Carbide Lathe Chisels on Solid Surface Materials

    Woodworking expert George Vondriska teaches you about the benefits of using carbide-tipped lathe chisels for turning bowls made from solid materials like countertop. He’s constantly impressed with how well... Read more

  • Finishing Bowl Bottoms on a Lathe 5:36

    Finishing Bowl Bottoms on a Lathe

    George Vondriska teaches you about the benefits of using a Modern Longworth Chuck System to finish the bottom of a bowl that you are turning on a woodworking lathe.... Read more

  • Super Finishing for Turning 4:33

    Super Finishing for Turning

    George Vondriska demonstrates the best way to apply a simple finishing mixture to a bottle stopper that is durable and will give the piece a proper shine. While the... Read more

  • Sharpening Lathe Chisels 9:27

    How to Sharpen Lathe Chisels

    George Vondriska shows us how to sharpen lathe chisels. A WoodWorkers Guild of America (WWGOA) original video. Advertisement > Read more

  • Sharpening Chisels At The Right Angles 6:58

    Sharpening Chisels At The Right Angles

    George Vondriska demonstrates the best way to sharpen woodworking chisels at the right angle using Darex equipment. A WoodWorkers Guild of America (WWGOA) original video. Advertisement > Read more

  • Sanding a Cylinder 1:45

    Sanding a Cylinder

    Sometimes, when turning a cylinder for your woodworking projects, you want it to be perfectly flat, but how do you accomplish that? George Vondriska shows you a foolproof sanding... Read more

Page 1 of 3123